"Farcaster" matching MCP tools:

• x402-farcaster-profileD

  minia2a-mcpD

  Farcaster Profile: Farcaster Profile

  ConnectorNo auth

• walletlink_submit_jobA

  walletlink.socialA

  Submit a list of addresses as a background job. A job runs a deeper scan than the resolve tool: an address the index has not checked, or holds only stale answers for, is resolved against live sources, so a job can find identities the resolve tool reports as never seen. Use it for lists larger than one resolve call, or when misses are worth re-checking. COST: billed on matches exactly like resolving, when the job completes: one match credit per address that resolved to an X handle or a Farcaster account, misses free. One job may be active per account at a time; a second submission is refused until the first finishes, and the refusal names the active job id. A submission is capped at 10 times the match balance, so the worst case is bounded by what the account already holds. Submitting itself spends one request-unit of the rate window. The submission returns a job id. Poll walletlink_job_status for progress and, on completion, the results. A job that fails is never billed. Resubmitting the same list after a job completes runs the whole job again and bills its matches again.

  ConnectorNo auth

• walletlink_estimate_listA

  walletlink.socialA

  A dry run over a list of addresses: how many are in the index, how many were checked and found bare, how many have never been seen, and the band a resolve would bill inside. Counts only, no identities. Use it to decide whether a list is worth resolving, and which tool to spend on. COST: free on the match meter, always, even at zero balance. It weighs the rate window exactly like resolving the same list (one request-unit per address), so it previews a batch at the batch’s own pace. Minimum 10 distinct addresses, because the counts are aggregates by design; the ceiling is your plan’s batch ceiling. Reading the band: low is exact for resolving this list now (the addresses already holding an X handle or a Farcaster account). high adds never-checked addresses at the measured overall rate; a background job resolves those against live sources, a plain resolve does not. Match rates differ several-fold by chain; the coverage tool and /v1/stats carry the measured per-chain table.

  ConnectorNo auth

• boost_postA

  ProductClankA

  Rally the ProductClank community to engage with a specific social post. Creates a boost campaign and spends the user's credits: 'replies' generates 10 AI reply drafts (200 credits); 'likes' (30 likes) and 'repost' (10 reposts) cost 300. Supports Twitter/X, Instagram, TikTok, LinkedIn, Reddit, Farcaster, and YouTube (replies + likes on YouTube; reposts only on X and Farcaster) — the platform is auto-detected from the URL. product_id is OPTIONAL: link a product (from search_products or create_product) to tailor replies with the product name, or omit it for a tweet-first boost that uses generic amplification language. Confirm the action and its credit cost with the user before calling.

  ConnectorNo auth

• walletlink_resolve_walletsA

  walletlink.socialA

  Resolve one or more Ethereum addresses to the social identities attached to them: X handle, Farcaster account, ENS name, Lens profile, GitHub account. COST: one match credit per address that resolves to an X handle or a Farcaster account. An address that resolves to nothing is free, and so is one carrying only an ENS name, a Lens profile or a GitHub account. Up to 50 addresses per call on the default plan; a live Scale pack raises the ceiling to 200 and Index to 1000, and the API refuses over YOUR ceiling with BATCH_SIZE_EXCEEDED naming it. A batch call spends one request-unit per address of the per-minute window, and a full batch fills most of a minute on every plan: the default plan gives 60 units per minute and 50-address batches, and a live Scale or Index pack raises both. Pace multi-batch runs a minute apart and read the reset time from the quota. Each identity reports whether the address owner attested it rather than it being correlated by a third party, and each X handle reports whether it still reaches anyone: a handle can be attested and suspended, or freed and since taken by a stranger. Send every address you need in one call. Duplicates are removed before you are charged, but each copy still costs throughput. A retried call bills again: duplicates are removed inside one call, never across calls, and a tool call cannot carry an idempotency key. Before resending a call that may have gone through, read the balance instead of guessing.

  ConnectorNo auth

• walletlink_wallets_by_farcaster_usernameA

  walletlink.socialA

  Find every wallet in the index attested to a Farcaster account. COST: one match credit per wallet returned, and a page holds up to 100. A username nobody holds returns an empty list and is free. A retried call bills its returned wallets again. Pass the username whole, including any .eth suffix: an ENS name attached to a Farcaster account is a large share of the index, and stripping the suffix will find nothing. Results are ordered by follower count, highest first.

  ConnectorNo auth

• walletlink_wallets_by_x_handleA

  walletlink.socialA

  Find every wallet in the index attested to an X account. The reverse of resolving an address. COST: one match credit per wallet returned, and a page holds up to 100. A handle nobody holds returns an empty list and is free. The free allowance is 100 matches per 30 days, so a single widely held handle can spend all of it in one call. Check the balance first with walletlink_account_balance if that matters. A retried call bills its returned wallets again. Results are ordered by Farcaster follower count, highest first. When more_pages is true, pass next_cursor back to continue.

  ConnectorNo auth

• search_knowledgeA

  Name Whisper — ENS Intelligence LayerA

  Search the ENS knowledge base — governance proposals, protocol documentation, developer insights, blog posts, forum discussions, and Farcaster casts from key ENS figures (Vitalik, Nick Johnson, etc.). Powered by semantic search over curated ENS sources. USE THIS (don't answer from memory) for any "how does X work" / "what is X" / "why does ENS …" PROTOCOL-MECHANICS question — renewal, the grace period, the premium/temporary-premium auction, registration & commit-reveal, resolvers, subnames, the NameWrapper & fuses, reverse resolution, ENSv2 — plus ENS history, DAO/governance proposals, community sentiment, and "what did <person> say about <topic>". Mechanics questions feel answerable from general knowledge, but a sourced, citable answer is the bar here — search first, then cite what you find. Do NOT use this for name valuations, market data, availability, or a specific name's live status — use the other tools for those.

  ConnectorNo auth

• basename_profileA

  x402 BazaarA

  Full onchain identity behind a Basename or address — Resolves the complete Base identity behind an address or Basename: resolved address, avatar, description, website and social handles (X/Twitter, GitHub, Farcaster, Discord) read from Base's L2 Resolver text records. Lets an agent turn a counterparty address into a real profile — beyond just the name. Complements address-trust (verification) with the human context. Required input: name. Priced $0.02 per call over x402 on Base; send a prepaid x-credit-token header for unlimited calls, or get 1 free call/day per tool. No wallet or API key required.

  ConnectorNo auth

• mainstreet_find_verifiedA

  mainstreetB

  Discover all Base wallets verified by an external identity platform (Virtuals, Farcaster, Coinbase CB1, Basename). Returns paginated address list. Call without `type` to see available platforms and counts. Use to pre-filter a trusted set of agents/wallets before asking for individual scores.

  ConnectorNo auth

• robinx_structureA

  robinx-mcpA

  Labeled holder-structure diff for a Robinhood Chain token: who FROZE (to the wei), who added, who trimmed, who exited over ~24h — every notable wallet stamped with what RobinX knows (insider-linked extraction record, deployer rap sheet, ENS + Farcaster identity with multi-wallet entities collapsed, round-number off-market flags) + a structure verdict: rotation vs top-distribution vs accumulation. The repricing-or-rug call price data cannot make. First call queues the scan (free, ~10-60s); call again for results. (paid $0.03 — see instructions)

  ConnectorNo auth

• robinx_smart_holdersA

  robinx-mcpA

  Wallets in this token's notable holder set that have a MEASURED record elsewhere on Robinhood Chain: off-market extraction history (with percentile rank among 4,000+ indexed wallets) and/or deployer track records, plus ENS/Farcaster identity. Strong signal, ambiguous direction — experienced wallets accumulating OR insider-linked wallets loading; not a buy call. Costs $0.05 USDC on Base. (paid $0.05 — see instructions)

  ConnectorNo auth

• share_journal_cardA

  Crank ProtocolB

  Pre-filled post for a journal card, ready to publish (free read). Returns the same card as get_journal_card plus a platform-shaped share payload: post text within the platform's character limit, the public card URL, and a compose-intent URL. ``platform`` is x | farcaster | generic. The copy is about YOUR process -- what your agent decided, that the rationale was written down before the outcome, and that the record is checkable on-chain. It never states or implies a return. THIS CALL PUBLISHES THE DECISION. Your journal is private by default; calling this marks THIS decision publicly readable at its card URL so the link in the post resolves for anyone (and for answer engines). Nothing else is published -- not your other decisions, not amounts, not your journal body unless include_rationale=true. Reviewing with get_journal_card publishes nothing. Workflow: SHARE step -- get_journal_card to review, this to publish.

  ConnectorNo auth

• robinx_entityA

  robinx-mcpA

  Follow a wallet across the accumulated holder-snapshot archive: every scanned token it appears in with balance then/now, plus ENS/Farcaster identity and insider/deployer records. The archive is recorded live and cannot be rebuilt retroactively. Costs $0.05 USDC on Base. (paid $0.05 — see instructions)

  ConnectorNo auth