"Asynchronous command execution for OpenCode terminal tasks" matching MCP tools:

• executeA

  klanex-mcpA

  Submit an HTTP call to a third-party API for reliable asynchronous execution. klanex validates the payload (optionally against payload_schema), stores credentials encrypted, executes with automatic retries/backoff/circuit breakers, and keeps an audit trail — you submit once and never retry transient failures yourself. Call this instead of making a direct HTTP request whenever the call has side effects (payments, messages, tickets, writes) or the target may be flaky. Prefer connection_id over headers for credentials. Always set idempotency_key for side-effecting calls so resubmitting can never double-execute. Set wait_seconds to block for the result; otherwise poll get_execution with the returned execution_id.

  ConnectorNo auth

• wsdot_get_terminal_spaceA

  wsdot-mcp-serverA

  Returns real-time drive-up and reservable vehicle space available at WSF terminals for upcoming sailings. Use for "will I make the ferry?" or "how full is the next sailing?" questions. Optionally filter to a specific terminal by ID (use wsdot_get_ferry_terminals for the ID). driveUpSpaceCount is the key field — zero means the drive-up lane is full. Destinations are arrivingTerminalIds, not the itineraryLabel string: a sailing can serve several terminals, and those IDs are what wsdot_get_ferry_schedule accepts. Results are paged by terminal (default 5, max 20): offset/limit select whole terminals and totalCount counts matching terminals, not sailings — every sailing of a returned terminal is included, so page size varies with how many departures each terminal carries.

  ConnectorNo auth

• browse_tasksA

  AgentMarketplaceA

  Browse tasks on the marketplace. Defaults to open (``posted``) tasks. Filters are plain-column matches — to filter by requirements (capabilities, min_trust), use ``find_agents_for_task`` for ranked, requirement-aware matching; this tool's own filters stay plain-column. Args: access_token: AgentAuth bearer token (requires ``market.read``). status: Task status to filter on. Defaults to ``"posted"`` (open tasks). Pass any valid status to see tasks in other states. task_type: Optional exact-match task type filter. limit: Maximum results, 1-100. Default 20. Returns: ``tasks`` (list, newest first), ``total`` (count returned), and the applied ``filters``. ``{"error_code": "invalid_input", ...}`` listing the valid values if ``status`` is not a real task status.

  ConnectorNo auth

• nukez_confirmA

  nukez-mcpA

  Confirm a file upload after sandbox curl completes. Call this after executing the curl command returned by nukez_store in sandbox mode. The server computes SHA-256 and records the hash. Requires a payer-signed locker:write envelope: signer-mode deployments sign automatically via the SDK; keyless clients first call without envelope to receive the exact envelope spec to sign, then re-call with envelope=<signed result> (the batch spec returned by nukez_store is also accepted here). LARGE FILES: pass use_job=true after a resumable upload — the synchronous confirm streams the whole stored object on the request path, so large objects confirm through the gateway's asynchronous finalize job instead. Signer mode creates and polls the job automatically; keyless mode signs the job creation spec first, then signs the returned poll spec (fresh nonce each time, re-calling with job_id) until job_status is terminal (complete, partial, or failed).

  ConnectorNo auth

• report_bugA

  Manawa TerminalA

  Log a bug in the same inbox as the terminal bug button (5 per user per day). Use only when the user asks, or when you have confirmed a real data/UI error. Do not file speculative bugs. Pass ticker/section so admins get a terminal URL; page_url is optional if it is already a terminal.manawa.app link. Args: description: What is wrong (10–2000 characters) ticker: Optional stock symbol the bug is about section: Optional tab (overview, financials, thesis, valuation, …) page_url: Optional full terminal URL if already known

  ConnectorNo auth

• manage_accountA

  mcp-serverA

  Returns instructions for creating a DPF account, verifying its email, resending the verification code, or resetting a forgotten password — it never performs these itself and never asks for a password. A password typed into this chat would sit in the conversation transcript, so every action instead returns the DPF website's own form, or a curl command that reads the password from a shell variable the user sets themselves in their own terminal. Hand the command to the user to run — do not run it yourself even if you have shell access, since composing the export line would require seeing the password. action "register": requires email, firstName, lastName, and termsAccepted: true (only after the user has explicitly agreed to the DPF Terms of Service and Privacy Policy in this conversation). action "verify": confirm the 6-digit code DPF emailed after registration (requires otp). action "resend": re-send that code if it never arrived. action "forgot-password": request a password-reset code (requires email). action "reset-password": submit that code and set a new password (requires otp).

  ConnectorOAuth

• publish_taskA

  Molt2MeetA

  Publish a task to make it visible to operators. Works for both settlementMode='escrow' and 'direct' tasks. The task must be in Draft or Funded status. For escrow Draft tasks: funds are automatically reserved and locked from your wallet (requires sufficient balance). For direct-settlement Draft tasks: no funding happens — the task goes directly from Draft to Published because the client pays the operator on-site (no escrow). This is the intended shortcut for direct-settlement. For Funded tasks (after escrow Quote → Fund flow): the funds are already locked, the task is simply made visible. After publishing, operators can accept the task. Requires authentication. Next: wait for task.accepted via get_task_events or webhook.

  ConnectorNo auth

• executeA

  klanexA

  Submit an HTTP call to a third-party API for reliable asynchronous execution. klanex validates the payload (optionally against payload_schema), stores credentials encrypted, executes with automatic retries/backoff/circuit breakers, and keeps an audit trail — you submit once and never retry transient failures yourself. Call this instead of making a direct HTTP request whenever the call has side effects (payments, messages, tickets, writes) or the target may be flaky. Prefer connection_id over headers for credentials. Always set idempotency_key for side-effecting calls so resubmitting can never double-execute. Set wait_seconds to block for the result; otherwise poll get_execution with the returned execution_id.

  ConnectorNo auth

• dreamagent_get_chat_statusA

  DreamAgent CloudA

  Check the progress and final status of a specific AI development session using its session key. Use this to monitor an asynchronous edit until it completes, fails, or is cancelled — keep checking until a terminal state. The session key comes from dreamagent_chat or dreamagent_list_sessions and is an identifier, not a secret. Returns (actual fields): 'active=', 'run_status=', 'next_after=' (cursor for the next check), optional 'new_output:' (text produced since the last check), then either "Still working — poll again" or a terminal 'done=true' line: finished (with the final output tail), 'the edit was NOT started: <reason>' (rejected early, e.g. HTTP 402 insufficient credits), or 'stream error' (the connection to the run broke — the server-side run may still have finished; verify with dreamagent_get_edit_progress). run_status values: queued | running | cancel_requested | completed | failed | cancelled | interrupted | unknown.

  ConnectorNo auth

• dreamagent_get_chat_statusA

  DreamAgentA

  Check the progress and final status of a specific AI development session using its session key. Use this to monitor an asynchronous edit until it completes, fails, or is cancelled — keep checking until a terminal state. The session key comes from dreamagent_chat or dreamagent_list_sessions and is an identifier, not a secret. Returns (actual fields): 'active=', 'run_status=', 'next_after=' (cursor for the next check), optional 'new_output:' (text produced since the last check), then either "Still working — poll again" or a terminal 'done=true' line: finished (with the final output tail), 'the edit was NOT started: <reason>' (rejected early, e.g. HTTP 402 insufficient credits), or 'stream error' (the connection to the run broke — the server-side run may still have finished; verify with dreamagent_get_edit_progress). run_status values: queued | running | cancel_requested | completed | failed | cancelled | interrupted | unknown.

  ConnectorNo auth

• url_scanner_async_scanA

  PreClick — An MCP-native URL preflight scanning service for autonomous agents (formerly URLCheck).A

  Submit a URL for asynchronous security analysis. Returns immediately with a task_id. Poll with url_scanner_async_task_status to check progress, then url_scanner_async_task_result to get the scan result. Async counterpart of url_scanner_scan for clients without native MCP Tasks support.

  ConnectorNo auth

• get_run_statusA

  Hydrata - ANUGA Flood SimulationA

  Lightweight status check for a simulation run (fast, <50ms). Use this for polling instead of get_run. Returns only: id, status, progress_pct (0-100), eta_seconds, error_message, and compute_backend. Poll every 5-10 seconds. Terminal states: complete, error, cancelled.

  ConnectorNo auth

• list_service_capabilitiesA

  Molt2MeetA

  List detailed execution options with pricing, duration, and proof types for physical-world tasks. Omit categoryId to get ALL capabilities across every category in one response — useful for semantic search by name/description when you are not sure which category fits. Pass a categoryId (from list_service_categories) to narrow down to one category. Use this to understand what proof you'll receive before dispatching a task. No authentication required. Next: dispatch_physical_task.

  ConnectorNo auth

• wsdot_get_ferry_terminalsA

  wsdot-mcp-serverA

  Returns all WSF ferry terminals with their numeric IDs, names, and abbreviations. Call this first to resolve human-readable terminal names (e.g. "Bainbridge Island", "Seattle", "Kingston") to the numeric terminal IDs required by the schedule and space tools. The terminal list is small (20 terminals) and rarely changes.

  ConnectorNo auth

• create_tasksA

  PlateA

  Create multiple tasks in a project in one action. Use this instead of calling create_task multiple times when the user asks to create several tasks at once. All tasks are created atomically — if validation fails for any item, nothing is created.

  ConnectorOAuth

• check_quote_jobA

  a2a2p — Agent-to-Agent-to-PhysicalA

  Check an asynchronous provider-estimate job created by request_provider_estimate, including its queued or terminal execution substate. Terminal statuses: completed, degraded, refused. An unknown read returns reason_code=unknown_or_not_yet_visible. Retry with backoff only when the id came from an authoritative admitted response; never infer an id after a rejected admission.

  ConnectorNo auth

• trigger_syncA

  GrowomatA

  Push the active Space's campaigns to your connected ad platforms and import remote changes. ASYNCHRONOUS: returns a syncId immediately with status 'started' (or 'nothing_to_sync'); the sync runs in the background. Poll get_sync_status with the syncId until its status is terminal (completed, partial, failed, or cancelled). Spends real ad budget and mutates external platforms. The platform connection is account-wide; the campaigns synced are the active Space's. Fails if a sync is already running in this Space. Scoped to the active Space — see set_active_space to switch, or pass space_id to override for this one call.

  Connector

  Destructive

  API key

• dreamagent_get_project_statusA

  DreamAgentA

  Check a project's creation/deployment state. Terminal states are 'ready' (built and live) and 'failed'; while a project is being created it reports progressive phases such as 'creating', 'building', 'deploying', or 'ai_provisioning' — treat any non-terminal status as still building. Use after dreamagent_create_project (poll until ready or failed) and whenever the user asks whether a project is ready or live. NOTE: this reports the PROJECT's build/deploy state — NOT AI edit progress. For edits use dreamagent_get_edit_progress.

  ConnectorNo auth

• get_tasksA

  TrendIdeaA

  Retrieve the structured tasks and milestones for an idea, pulled from its Execution Playbook, Product Roadmap and/or First 100 Days simulation. Use the source parameter to pick one plan or get all of them merged. Read-only and free; use update_task to tick First 100 Days items off.

  ConnectorNo auth

• invoke_publish_nowA

  Socializioz — AI Social Media ManagerB

  Publishes a public Post only on explicit user request; cannot be undone. PENDING_APPROVAL: approve_post or override_approval. FAILED: retry_failed_publication. Asynchronous: publish_status=PUBLISHING is not live yet; confirm is_published=true.

  Connector

  Destructive

  OAuth

• create_ganttA

  mcp-serverA

  Create a Gantt chart from a task list — no account or API key needed. YOU author the plan: list the tasks in execution order with realistic working-day durations and dependencies (0-based positions of earlier tasks; use { task, type, lag } for start-to-start/finish-to-finish links or lag). Milestones have duration 0. Only add a dependency where a task truly needs another one finished - independent tasks should run in PARALLEL (share a predecessor, or take no dependencies at all and start at the project start). Group tasks into top-level phases for a structured plan/WBS: the phase task gets isPhase: true, its tasks get parent = the position of the phase. LoopGantt schedules it with its critical-path engine and returns a picture of the chart, the dates, the critical path and a link where the user can view, export (PNG/PDF) and save the chart. Always show the user the link. Tasks with a due date take deadline: YYYY-MM-DD (a marker - the reply reports the fit). Use create_gantt when the user wants a chart to open, export or save; use schedule_project instead for what-if date math where nothing should be stored.

  ConnectorNo auth